“They were able to schedule an inspection in no time. With a free evaluation and estimate. 100% recommended, very professional and accommodating.”
Mold in a building you run costs you twice: once to put it right, and again for every day you cannot let people in. PureAire Technology treats commercial property across Miami-Dade with the patented VaPURE™ vapor process, usually in one visit and usually without opening walls. An accredited third-party lab confirms the result before we close the job, and you keep the report.
5.0/5 stars on Google. Every reviewer is a real client.
“They were able to schedule an inspection in no time. With a free evaluation and estimate. 100% recommended, very professional and accommodating.”
“I had a great experience with PureAire Technology. Scott was professional, helpful, and easy to communicate with throughout the mold-treatment process. Very happy with the service and would recommend them!”
“After a long and terribly expensive and invasive traditional remediation failed to fully eliminate the mold in my home, thanks to a friends recommendation, I discovered PureAire’s method . After going through so much with my first go around, I had to research to believe it, What sold me was the evidence that was backed by science. There is truly nothing else like it in the market. And what sealed the deal was Scott’s professionalism and finally living in a home where I know I am breathing clean healthy air. I’m so grateful to have found Pureair and wholeheartedly recommend them to anyone dealing with mold!”
“Amazing job! On time, attention to detail and very knowledgeable! Highly recommend!”
“David was friendly, knowledgeable, and super easy to work with. Payment was easy, process was straight forward and quick, and I would definitely recommend to anyone looking for assistance with mold!”
“Technician very knowledgeable, honest and thorough during the inspection. We were very pleased with his work.”
Conventional commercial remediation means containment sheeting, tear-out, a rebuild and weeks of contractors on site. The VaPURE™ vapor process treats the same building in a single visit, in most cases without demolition, and ends with a lab result you can hand to a tenant, an insurer or a buyer.
Most sites book us after close or over a weekend. One visit covers most properties, so you open as normal the next morning.
Vapor reaches into wall cavities, ceiling voids and ductwork that a scrub-and-cut crew has to break open. Less tear-out means less rebuild, fewer trades and a shorter closure.
Post-treatment air samples go to an accredited third-party lab, and we compare them with an outdoor sample taken the same day.
The vapor disperses at around 7.5 microns. Mold spores measure 12 to 30 microns, so the treatment travels into gaps a spore has already settled in and a sprayed surface cleaner never reaches.
The active component of the sterilant is on the EPA's Safer Chemical Ingredients List. Staff and tenants return once the space has been ventilated.
No other company in Miami-Dade County holds a license for Pure Maintenance's patented VaPURE™ technology. You deal with one team, one process and one point of contact.
Single units, whole floors, and buildings staged over several nights. Tell us the property type and the hours you can give us, and we will scope it on the first call.
Book Free ConsultationThe same protocol on every commercial job: survey, treat, protect, prove. You get the scope in writing before we start and the lab result when we finish.
We walk the property, find visible growth and the moisture conditions behind it, and take baseline air samples inside and outdoors. You get a scope, a price and a schedule that fits your trading hours.
The sterilant is dispersed as a vapor through the treated space, reaching surfaces, contents, voids and ductwork. Most properties are done in one visit; larger buildings are staged across several nights.
Stage two applies an antimicrobial protectant that bonds to surfaces, attracts new spores electrostatically and disrupts them on contact. It does not wash off and it is invisible once dry.
Post-treatment samples go to an accredited third-party lab with no affiliation to any remediation company. Results come back in around ten days as a written before-and-after report.
Two documents worth reading before you sign anything: a U.S. Army field test of the process on occupied buildings, and the technical paper explaining why particle size decides where a treatment can reach.
A U.S. Army Engineer Research and Development Center field test of the two-step process on two occupied buildings at Fort Campbell, Kentucky, measuring both the initial result and recurrence over six months.
The technical explanation of vapor peracetic acid: particle size, the vapor phase change and dwell time, and why a 7.5 micron droplet travels where a 12 to 30 micron spore has already settled.
The treated space has to be empty of people and pets while the vapor is working. Timing varies with the size of the space and the outdoor temperature. Most sites book us after close or over a weekend and trade as normal the next morning.
In most buildings, no. The vapor reaches into cavities and voids that a conventional crew has to cut open, so the usual tear-out and rebuild is often avoided. Where a material is already water-damaged or structurally failed, it still has to come out, and we will say so in the survey rather than after the invoice.
Air samples from the treated space and an outdoor reference sample, both sent to an independent accredited lab. The job passes when indoor readings come in at or below the outdoor sample. Results come back in around ten days and the written report is yours to keep.
We treat unit by unit, floor by floor, or common areas on their own, and stage the work across several nights so the building keeps running. Tenants get a written prep note a few days ahead: open closets and cabinets, keep windows closed, take pets with you.
It depends entirely on moisture. Where the water source has been fixed and only minor condensation remains, buildings we have treated have gone years without regrowth, and the antimicrobial protectant keeps working on newly introduced spores. Where a leak or a drainage problem is left unresolved, expect protection measured in months. Mold is a moisture problem; the treatment deals with what is there today and buys you time to fix the cause.
No. We identify the moisture conditions during the survey and write them up, and your own trades or building maintenance carry out the repair. We would rather tell you that plainly than treat a building twice.
Leave as much in place as you can. The vapor is dry, evaporates as it works and leaves no visible residue, so contents, soft furnishings and electronics generally stay put. Tell your technician about any brass fittings or valuable artwork and they will adjust the application.
The first step is a free phone consultation with a specialist. We will talk through the property, what is likely causing the mold, how the treatment would be staged around your operation, and what it costs.
A small, senior team, so the person who scopes your building is the person who treats it. Currently taking new commercial clients across Miami-Dade County.
Miami Gardens · Hialeah · Miami Lakes · North Miami
Kendall · Pinecrest · Palmetto Bay · Cutler Bay · Homestead
Coral Gables · Doral · Coconut Grove · Key Biscayne